Chapter 5: Worklist
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 5-6
Operator Manual © 2008 General Electric Company. All rights reserved.
Patient List Columns
Table 5-2 describes the columns on the Worklist. This information comes from what has been entered in
the Patient Information screen. Refer to Overview
(p. 5-15) for detailed descriptions of the information
presented.
Table 5-2 Worklist columns
Column Description
Date The date the procedure is scheduled to occur. On locally added procedures, the
current date is the default.
Patient The full name of the patient as entered in Add Patient/Patient Information screen.
Patient ID The patient’s medical record number or any number that distinguishes the patient.
Accession # The exam’s accession number.
Description The procedure ordered for the accession number. (This is the content of the
Procedure Description field on the Add Information screen.)
Physician The name of the physician or technician who performed the exam. (This is the
content of the Performing Physician field on the Add Information screen.)
Modality The modality of the procedure.
Status The status of the procedure.
Available options are:
• Scheduled – procedure has been created but not started.
• Completed – procedure has been closed.
• Suspended – procedure was started then interrupted.
• Discontinued – procedure was opened but cannot be completed.
Refer to Chapter 6:
Image Acquisition-End Exam (p. 6-16) for more information
about Completed, Suspended, and Discontinued exams.
Location The location of the patient within the facility.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
