Chapter 5: Worklist
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 5-8
Operator Manual © 2008 General Electric Company. All rights reserved.
2. Press the column heading again to switch between ascending and descending order.
An up-pointing arrow indicates that the column is sorted in ascending order. That is, sorted in
alphabetical order or numerical order from smallest to largest.
A down-pointing arrow indicates that the column is sorted in descending order. That is, sorted in
reverse alphabetical order or numerical order from largest to smallest.
Figure 5-3 Column with ascending sort
Filter List
Use filters to only display items corresponding to your chosen criteria, e.g., exams taken only within a
specified time period, patients whose last names begin with the letter ‘J’, or patient IDs beginning with
the digits ‘547’.
Filters cannot be saved.
Pressing [REFRESH] will remove any filter that has been applied.
Figure 5-4 Worklist filter screen
The filter screen has several options for accepting or rejecting the information from the Worklist. Table 5-
3 describes the filter screen functions.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
