GE Definium 5000 User Manual

Chapter 5: Worklist
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 5-11
Operator Manual © 2008 General Electric Company. All rights reserved.
Refresh
The Definium 5000 system may be configured to automatically refresh the Worklist with data from the
HIS/RIS on a regular basis (such as every 10 minutes). However, if your system does not automatically
refresh—or you want to refresh the list before the scheduled time—you are able to refresh the list
manually.
The Refresh feature also removes any filtering that has been applied. Refer to Filter List
(p. 5-8) for more
information.
Manual Refresh
Follow this process to manually refresh the Worklist.
1. Press [REFRESH] on the Worklist.
 The Worklist updates with HIS/RIS data and removes any filtering.
NOTE: Refresh does not remove locally added procedures.
NOTE: You will not be able to make selections or access Worklist functions while the Worklist is refreshing.
Auto Refresh
The Auto Refresh interval is set on the Preferences – Worklist screen in System Utilities. Refer to
Chapter 10:
Set Preferences-Worklist (p. 10-13) for more information.
When the system auto refreshes, a message (Figure 5-7) appears: “Auto Refresh in progress. Please wait.”
The message remains until the refresh process is complete.
NOTE: You will not be able to make selections or access Worklist functions while the Worklist is refreshing.
Figure 5-7 Auto refresh message
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).

GE Definium 5000 Specifications

General

Brand	GE
Model	Definium 5000
Category	Medical Equipment
Language	English