Chapter 4: General Information
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 4-1
Operator Manual © 2008 General Electric Company. All rights reserved.
Chapter 4: General Information
This chapter explains some of the basic operations and features of the system such as how to start up
and shutdown the system software, how to login and log off, and how to view system status and
messages.
Topics covered include:
• System Start Up and Shutdown
(p. 4-2)
– Start Up
(p. 4-2)
– Shutdown
(p. 4-2)
• Login and Log off
(p. 4-3)
– Invalid Password Message
(p. 4-4)
– Emergency Login
(p. 4-5)
– Log Off
(p. 4-5)
• Software Reset
(p. 4-6)
• Lead Markers
(p. 4-7)
• System Status and Messages
(p. 4-7)
– Expose Hold
(p. 4-7)
– X-ray Tube Heat Units Remaining
(p. 4-8)
– System Status Area
(p. 4-8)
– Message Log
(p. 4-8)
• iLinq
(p. 4-9)
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).