Chapter 10: Set Preferences
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 10-50
Operator Manual © 2008 General Electric Company. All rights reserved.
Protocol Editor Copy Functions
Follow this process to access the Protocol Database Editor.
1. From the Worklist, select [UTILITIES].
2. Select Preferences > Protocols.
3. Press [EDIT].
The Exam Menu appears.
Figure 10-32 Exam Menu
4. Continue with Copy Category
(p. 10-50), Copy Exam (p. 10-51), or Copy View (p. 10-51).
Copy Category
1. Select the Category to copy
2. Press [COPY CAT].
3. Enter the new name to use or retype the existing name
NOTE: If reusing the existing name, be sure to include any underscores in the title.
4. Select the position on the Category list.
5. Press [OK].
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
