GE Definium 5000 - Copy Exam; Copy View

Chapter 10: Set Preferences
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 10-51
Operator Manual © 2008 General Electric Company. All rights reserved.
6. Continue with Copy Exam (p. 10-51).
Copy Exam
1. Select the Exam to copy.
2. Press [COPY EXAM].
3. Enter the new name to use or retype the existing name.
4. Select the Category to copy to.
5. Select the position on the Exam list.
6. Press [OK].
7. Continue with Copy View
(p. 10-51).
Copy View
1. Select the View to copy.
2. Press [COPY VIEW].
3. Enter the Exam Name to use or retype the existing name.
4. Select the Copy to Category from the list.
5. Select the Copy to Exam from the list.
6. Select the Position View from the list.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).