Chapter 10: Set Preferences
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 10-45
Operator Manual © 2008 General Electric Company. All rights reserved.
1. Select the category for the new exam.
2. Press [ADD EXAM] or [EDIT EXAM].
The Add Exam (or Edit Exam) screen appears
3. Type an Exam Name. (Use underscores instead of spaces.)
4. From the Position Exam After drop-down list, select the position of the exam within the category.
5. Select the Default Patient Size for the exam.
6. Press [OK].
7. Continue with Add or Edit View
(p. 10-45).
NOTE: Exams must be populated with new or copied views after creation in order to be fully functional
Add or Edit View
NOTE: The screens and process to edit a view are the same as for adding a view.
This process has multiple screens.
From the Exam Menu:
1. Expand the Category.
2. Select the Exam to add or copy the new view to.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
