Chapter 10: Set Preferences
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 10-29
Operator Manual © 2008 General Electric Company. All rights reserved.
DEI (Detector Exposure Index)
Figure 10-19 Preferences - DEI screen
The Detector Exposure Index screen allows you to control if or how the DEI is displayed on the Image
Viewer screen and to change the lower and upper limits for anatomical views.
These settings determine how DEI is displayed for all images.
Follow this process to change the DEI settings.
1. From the Worklist screen, press [UTILITIES].
2. Select Preferences > DEI.
3. Press DEI Preferences [EDIT].
The Detector Exposure Index screen (Figure 10-20) appears.
4. Continue with Change the DEI Display
(p. 10-30) or Change the Lower and Upper Limits (p. 10-30).
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
