Chapter 10: Set Preferences
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 10-11
Operator Manual © 2008 General Electric Company. All rights reserved.
Table 10-5 Add Printer screen– Film sizes description
Function Description
Film sizes (8 x 10in) Selects the sizes of film available for the printer.
Pixel size: W (width) Sets how wide the film is in pixels.
This value is provided by the printer manufacturer based on what the
printer supports.
Pixel size: H (height) Sets how high the film is in pixels.
This value is provided by the printer manufacturer based on what the
printer supports.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
