Chapter 10: Set Preferences
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 10-25
Operator Manual © 2008 General Electric Company. All rights reserved.
Processed image printed Selecting the Print parameter allows auto deletion of images that have
been printed.
Processed image sent Allows auto deletion of processed images with no errors that have been
sent to another viewing station.
Processed image
committed
Allows auto deletion of processed images that have been sent to a long
term device with storage commitment capability.
Storage commitment for a network host is configured from the System
– System screen, Network Connections.
Allow Non-Quality
Checked (tagged) images
to be deleted regardless
of being sent, committed
or printed.
Allows auto deletion of any images that do not have the Auto Tag
(Quality Check) mark.
NOTE: If any of the images in the series have the Auto Tag (Quality Check)
mark, the series will not auto delete.
[SAVE] Saves your changes and closes the screen.
[CANCEL] Closes the screen without saving changes.
Function Description
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
