Revision History
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) iii
Operator Manual © 2008 General Electric Company. All rights reserved.
Revision History
Rev.
#
Date
Pages
Affected
Reason for Change
1 25 May 2007 All Initial release.
2 26 Jul. 2007 A-9, i-i, 2-2,
2-6, 2-8, 2-9,
3-5, 3-9, 3-
12, 3-13, 3-
15, 3-19, 3-
20, 4-2, 4-3,
7-8, 7-15,
10-14, App
C
Additions and updates.
3 12 Nov. 2007 2-7, 3-7, 3-
13, 3-21, 3-
24, 11-6
Additions and updates.
4 13 Feb. 2008 3-13 Added information about default autoposition programs and Table 3-5.
3-14 Changed step 6 of the Modify Positions section. Added step 7.
3-18, 3-19 Updated Figure 3-20 with callout.
Added row 13 to Table 3-7 to explain SID Change between 100cm and 180cm in
over-ride mode.
3-28 Added row 24 to Table 3-9 for “Physical Limit: Height Maximum. Recalibrate”
message.
4-2, 4-3 Changed system shutdown instructions. Now there are two shutdown options.
6-12 Added definition of acronym “SPS” to first bullet point at top of page. ''Scheduled
Procedure Step (SPS)”.
A-7 Changed step 14.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
