311
Figure 324 Security setup
6. Bind an AP radio to a wireless service
a. Select Wireless Service > Access Service from the navigation tree.
b. Click the Bind link at the right side of the wireless service mac-auth to enter the page as shown
in Figure 325.
c. Selec
t the box with radio mode 802.11n(2.4GHz).
d. Click Bind.
Figure 325 Bind an AP radio
7. Enable the wireless service
a. Select Wireless Service > Access Service from the navigation tree.
b. On the page that appears, select the mac-auth box and click Enable.
To Next Page
Loading...
