H3C WA Series

330
g. Disable Handshake and Multicast Trigger (recommended).
h. Click Apply.
Figure 353 Security setup
6. Bind an AP radio to a wireless service
a. Select Wireless Service > Access Service from the navigation tree.
b. Click the Bind link at the right side of the wireless service dot1x to enter the page as shown
in Figure 354.
c. Selec
t the box with radio mode 802.11n(2.4GHz).
d. Click Bind.
Figure 354 Bind an AP radio
7. Enable the wireless service
a. Select Wireless Service > Access Service from the navigation tree.
b. Select the dot1x box.
c. Click Enable.