possibly leave the system in an unknown state. Check with any users that are
logged on. Wait until their processes are complete before releasing the
system lock.
Before you begin
You must have the Storage Administrator (View & Modify) role to complete
this procedure.
Procedure
1. In the maintenance utility Menu navigation tree, click System
Management.
2. Click Force Release System Lock.
3. A warning message is displayed. Verify that releasing the lock will not
cause data loss or other problems. To release the system lock, click OK.
Click Cancel to close the dialog box without releasing the system lock.
Registering the primary SVP host name
You must register the primary SVP host name before completing any of the
following tasks.
124 Configuring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General