Hitachi VSP G400 System Administration Guide

Email settings
Procedure
1. To send email notices, click Enable, next to Email Notice. Click Disable
to not send email notices.
2. Click Add to add an email address to the list of registered addresses.
3. Enter the email address and then use the pull-down menu to select the
type of address: To, Cc, or Bcc.
4. Click OK to save the email address and close the dialog box.
5. Enter an email address in Email Address (From).
6. Enter an email address in Email Address (Reply To:).
7. In Mail Server Settings, select the mail server type: Identifier, IPv4,
or IPv6.
8. To use SMTP authentication, click Enable.
9. In Account, enter an SMTP account name.
10. In Password, enter the SMTP account password.
11. Click Apply to save the changes and close the Set Up Alert
Notifications window.
Syslog settings
Procedure
1. Click the Syslog tab.
248 Alert notifications
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English