Hitachi VSP G400 System Administration Guide

If you omitted the serial number, it is executed for the storage system of
83-03-01-XX/00 or later that is registered in the Storage Device List
window.
5. A confirmation message box displays.
If you want to continue, enter Y, and then press the Enter key. If you
want to cancel the task, enter N, and then press the Enter key.
6. Press any key to acknowledge the message and close the message box.
7. Close the Windows command prompt.
8. Start the service of the storage system which is reassigned.
Initializing and reassigning an automatically assigned port number
You can initialize the port number that is automatically assigned to the
storage system.
Caution:
• Stop the service of the storage system which has the status Ready in the
Storage Device List window before initializing.
• If you did not stop before initializing, execute Reassigning an automatically
assigned port number on page 132.
Procedure
1. Logout from Device Manager - Storage Navigator.
2. Stop the service of all the storage systems which have the status Ready
in the Storage Device List window.
3. Open the Windows command prompt as administrator on the SVP.
4. In the folder where the .bat file is located, execute the following
command:
C:\MAPP\wk\Supervisor\MappIniSet>MappPortManageInit.bat
5. A confirmation message box displays.
• If you want to continue, enter Y, and then press the Enter key.
• If you want to cancel the task, enter N, and then press the Enter key.
6. Press any key to acknowledge the message and close the message box.
7. Reassign the port number.
C:\MAPP\wk\Supervisor\MappIniSet>MappPortManageRenum.bat serial-
number (optional)
Note: A space is required between MappPortManageRenum.bat
and serial-number.
If you omitted the serial number, the batch file is run for the storage
system of 83-03-01-XX/00 or later which is registered in Storage
Device List window.
8. A confirmation message box displays.
• If you want to continue, enter Y, and then press the Enter key.
Configuring the storage system 133
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English