Sending a test email message
Procedure
1. Click the Email tab.
The Email tab displays the current settings for the mail server, SMTP
authentications, and email addresses.
2. Click Send Test Email.
A completion notice displays.
3. Click OK to acknowledge the notice and close the message.
Example of a test email message
Subject: VSP Gx00 Report
DATE : 24/10/2014
TIME : 10:09:30
Machine : Hitachi Virtual Storage Platform Gx00 (Serial# 64019)
RefCode : 7fffff
Detail: This is Test Report.
The field definitions in the test email message are listed in the following
table.
Item Description
Subject Email title (name of the storage system) + (report)
DATE Date when a system failure occurred.
TIME Time when a system failure occurred.
Machine Name and serial number of the storage system.
RefCode Reference code. The same code as the one reported by SNMP traps.
Detail Failure details. The same information as the one reported by SNMP traps.
See the Hitachi SNMP Agent User Guide for reference codes and failure
details.
Sending a test Syslog message
Procedure
1. Click the Syslog tab.
The Syslog tab displays the current settings for the primary and
secondary servers.
2. Click Send Test message to the Syslog Server.
A completion notice displays.
3. Click OK to acknowledge the notice and close the message.
Alert notifications 251
System Administrator Guide for VSP Gx00 models and VSP Fx00 models