Displaying details of RADIUS server
Procedure
1. Navigate to Home > SMU Administration > RADIUS Server to
display the RADIUS Server page.
2. Select a RADIUS server, and click details to display the RADIUS Server
Details page.
Field/Item
Description
RADIUS server IP address
or DNS name
The RADIUS server IP address or DNS name.
Shared Secret The shared secret, displayed with asterisks.
Port The RADIUS server authentication port.
Protocol Protocol associated with the RADIUS server.
Timeout The number of seconds the SMU waits before retrying (retrying
is re-transmitting the authentication request to the same
RADIUS server). If the timeout is reached and there is no
response from the first RADIUS server in the list, the SMU
attempts another retry.
Retry Count When the retry limit is reached, the SMU sends the request to
the next RADIUS server in the list. When the retry limit for the
second server is reached, the SMU attempts to reach the next
server in the list, until there are no more servers to try. If the
timeout is reached, and there are no more servers to try, the
user cannot be authenticated, and the login fails.
Check connectivity Click to check the connectivity status of the RADIUS server.
Configuring SMU security (NAS module only)
This screen allows you to change web application security settings.
Setting up security 241
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General