Hitachi VSP G400 System Administration Guide

Item Content
IP Address IP address for an iSCSI target of an external storage system
• IPv6:
XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX (hexadecimal)
• IPv4:
XXX.XXX.XXX.XXX (decimal)
• Blank if "Package Type" is iSCSI.
TCP Port Number TCP port number (1 through 65535) for the iSCSI target of an external storage
system
Blank if "Package Type" is Fibre.
iSCSI Target Name iSCSI target name of an external storage system
Blank if "Package Type" is Fibre.
Notes:
1. If the character string contains a comma, the comma is converted to a tab.
EnvMonInfo.csv
This CSV file contains information about the power and temperature of the
storage system. Power and temperature measurements from the
environment monitor are recorded every two hours.
No records are created during a system power failure or if the breakers are
turned off. If the system is in maintenance mode or the SVP is rebooted, up
to two hours of records could be lost.
If a failure occurs in the storage system, the correct information might not be
output.
Table 30 EnvMonInfo.csv file (Title: <<Electric power and temperature
Information>>)
Item
Description
Date Year, month, and date when record data was acquired for the two-hour period in the
format:
YYYY/MM/DD HH:MM:SS
Electric power average Average value of electric power (W)
Electric power maximum
value
Maximum value of electric power (W)
Electric power minimum
value
Minimum value of electric power (W)
In the following cases, a lower value might be temporarily displayed:
• When the storage system is starting up
• Right after replacing storage system parts
• During or after microcode update
DKC0 CL1 Temperature
average
DKC0: Average temperature of CL1 (°C)
326 Examples of storage configuration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English