Requirements for management clients
The Device Manager - Storage Navigator administrator is responsible for
setting up management clients.
The administrator's responsibilities include:
• Ensuring that Device Manager - Storage Navigator management clients run
on supported versions of Windows and UNIX/Linux operating systems.
• Verifying that management clients can access and use Device Manager -
Storage Navigator.
• Configuring the server if you use a physical or virtual server running on
Windows as a management client.
General requirements
• An SVP, required for system maintenance, must be connected to the
storage system. Device Manager - Storage Navigator connects to the SVP
through a TCP/IP network.
• Several storage systems can be managed by one management client.
Device Manager - Storage Navigator must be set up for each storage
system.
• A maximum of 32 management clients (Device Manager - Storage
Navigator) can access the same SVP concurrently.
• Use thinnet coaxial cable for twisted-pair LAN connections. Maximum cable
length is 607 feet (185 meters). For assistance, contact the customer
support.
Requirements for Windows-based computers
Note: The combinations of operating system, architecture, browser, Java
Runtime Environment, and Adobe Flash Player described below are fixed
requirements. Using other combinations or versions might produce
unpredictable results such as the inability to operate program windows.
Therefore, contact customer support to use other combinations or versions.
Hardware requirements
Item
Requirement
Processor (CPU) Pentium 4 640 3.2 GHz or better
(Recommended: Core2Duo E6540 2.33 GHz or better)
Memory (RAM) 2 GB or more
Recommended: 3 GB
Available storage space 500 MB or more
Monitor True Color 32-bit or better
42 Preparing your management software
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General