• Enter the fully qualified domain name or IP address of the server, and
click Add.
• Click find servers.The list of discovered servers is displayed.
Note: The DNS server or servers must be configured for the
SMU (under Name Services) for find servers to work.
â—‹ Select one or more servers and click add to add them to the list. No
more than 20 Active Directory servers can be configured at a time.
â—‹ When you are finished, click close to return to the Active
Directory Servers window.
6. If there is more than one server, the list can be prioritized using Move
Up or Move Down .
7. Click Apply to submit this page and save the connection settings and
server list to the SMU database.
The SMU will perform a connection test to check that it can access the
configured servers with the supplied details and display a warning if the
SMU cannot, giving the user the opportunity to modify the settings or to
save them as they are.
Any information, warnings and errors related to Active Directory
configuration or authentication are logged to /var/opt/smu/log/mgr/
mgr.log and /var/opt/smu/log/mgr/security.log
Configuring Active Directory groups
Before Active Directory users can log into the SMU, you must configure one
or more Active Directory groups. After a group has been added and saved,
members of that group can log into the SMU using their Active Directory
name and password. Active Directory users belonging to the subgroups of the
configured group also have SMU access.
Before you begin
Note that the administrator is only able to configure groups after Active
Directory servers have been added on the Active Directory Servers page.
Setting up security 233
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General