Hitachi VSP G400 System Administration Guide

The following table describes the port number key names and the initial value
of the port number.
Port number key
name
Protocol Initial port number
Corresponding SVP
software version
MAPPWebServer HTTP 80 83-01-20-XX/00 or later
MAPPWebServerHttps HTTPS 443 83-01-20-XX/00 or later
RMIClassLoader RMI 51099 83-01-20-XX/00 or later
RMIClassLoaderHttps RMI (SSL) 5443 83-01-20-XX/00 or later
RMIIFRegist RMI 1099 83-01-20-XX/00 or later
PreRMIServer RMI 51100 83-01-20-XX/00 or later
Automatically
assigned
83-03-01-XX/00 or later
DKCManPrivate RMI 11099 83-01-24-XX/00 or later
SLP SLP 427 83-01-24-XX/00 or later
SMIS_CIMOM SMI-S 5989 83-01-20-XX/00 or later
Automatically
assigned
83-03-01-XX/00 or later
CommonJettyStart HTTP 8080 83-01-24-XX/00 or later
CommonJettyStop HTTP 8210 83-01-24-XX/00 or later
RestAPIServerStop HTTP 9210 83-01-24-XX/00 or later
DeviceJettyStart HTTP 8081 83-01-24-XX/00 or later
Automatically
assigned
83-03-01-XX/00 or later
DeviceJettyStop HTTP 8211 83-01-24-XX/00 or later
Automatically
assigned
83-03-01-XX/00 or later
Viewing the port number used in SVP
You can view the port number used in SVP.
Procedure
1. Open the Windows command prompt as administrator on the SVP.
2. In the folder where the .bat file is located, execute the following
command:
C:\MAPP\wk\Supervisor\MappIniSet>MappPortRefer.bat serial-
number (optional)
Note:
A space is required between .bat file and the serial number.
128 Configuring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English