Hitachi VSP G400 System Administration Guide

4. Browse to the certificate file and click Open. The File Upload window
closes and returns you to the Update Certificate Files dialog box.
5. In the Web Server Password: field, enter the certificate password.
6. Enter the password again in the Web Server Re-enter Password: field.
7. Select a Connect to SVP certificate file to update. Click the Connect to
SVP checkbox, then click Browse.
8. Browse to the certificate file and click Open. The File Upload window
closes and returns you to the Update Certificate Files dialog box.
9. In the Connect to SVP Password: field, enter the certificate password.
10. Enter the password again in the Connect to SVP Re-enter Password:
field.
11. Click Apply to update the certificates.
Releasing HTTP communication blocking
If the web server supports SSL (HTTPS), you can use the HTTP setting tool to
release a block to the HTTP communication port as needed.
Before you begin
• You must have the Storage Administrator (Initial Configuration) role to
perform this task.
• You must be logged into the SVP.
Procedure
1. Close all Device Manager - Storage Navigator sessions on the SVP.
2. Open a command prompt window with administrator permissions.
Setting up security 223
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English