Hitachi VSP G400 System Administration Guide

Task
Block-only storage
systems (no NAS
modules installed)
Block and file storage systems (NAS
modules installed)
Manage authorization and
authentication servers
Device Manager - Storage
Navigator
See Setting up
authentication and
authorization on
page 224
N/A
Create LDAP, RADIUS, and
Kerberos configuration files
Device Manager - Storage
Navigator
See Authentication server
protocols on page 225
NAS Manager
See the Server and Cluster
Administration Guide (MK-92HNAS010)
Installing licenses Maintenance utility
See Managing license keys
on page 257
NAS Manager
See Managing license keys on page 257
Enabling and disabling
licenses
Maintenance utility
See Managing license keys
on page 257
NAS Manager
See Managing license keys on page 257
Removing licenses Maintenance utility
See Managing license keys
on page 257
NAS Manager
See Managing license keys on page 257
System administration using Hitachi Storage Advisor
Configure block storage
Use Storage Advisor to configure the block storage.
Enabling or disabling port security
Before a host storage domain (HSD) can be created on a port, port security
must be enabled. By default, security is disabled on supported storage
systems. If port security is disabled Storage Advisor will not select the port
for HSD creation. If you select a port that has security disabled, you are
limited to the default host group. If the user manually selects the port with
security disabled, the host group will be created.
Procedure
1. On the Storage Advisor dashboard, click Storage Systems to see the
inventory of storage systems and capacity information.
2. Click a storage system to see its configuration of pools, ports, volumes,
and parity groups.
3. Click Ports to see the configured storage ports for the storage system.
64 Configuring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English