Hitachi VSP G400 System Administration Guide

Operation name Conditions
Initialization All ports must be assigned to the Storage Administrator
group permitted to manage them.
Set threshold
Creating configuration files
Authentication servers and authorization servers must be configured using
configuration files. Configuration files can be created for LDAP, RADIUS, and
Kerberos authentication protocols.
Creating an LDAP configuration file
To use an LDAP server for authentication, create a configuration file in UTF-8
encoding. Include information about the authentication server as shown in
the following example. Any file name and extension is allowed.
Caution: If you save the configuration file when using the Windows standard
Notepad application, specify ANSI for the letter code. If you use an editor
other than the memo pad and have the YTF-8 BOM setting, specify No BOM
then save.
auth.server.type=ldap
auth.server.name=<server_name>
auth.group.mapping=<value>
auth.ldap.<server_name>.<attribute>=<value>
A full example is shown here:
auth.server.type=ldap
auth.server.name=PrimaryServer
auth.group.mapping=true
auth.ldap.PrimaryServer.protocol=ldaps
auth.ldap.PrimaryServer.host=ldaphost.domain.local
auth.ldap.PrimaryServer.port=636
auth.ldap.PrimaryServer.timeout=3
auth.ldap.PrimaryServer.attr=sAMAccountName
auth.ldap.PrimaryServer.searchdn=CN=sample1,CN=Users,DC=domain,DC
=local
auth.ldap.PrimaryServer.searchpw=passwordauth.ldap.PrimaryServer.
basedn=CN=Users,DC=domain,DC=local
auth.ldap.PrimaryServer.retry.interval=1
auth.ldap.PrimaryServer.retry.times=3
auth.ldap.PrimaryServer.domain.name=EXAMPLE.COM
The LDAP attributes are defined in the following table.
Attribute Description
Required /
Optional
Default value
auth.server.type Type of an authentication server.
Specify ldap.
Required None
User administration 187
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English