Hitachi VSP G400 System Administration Guide

Attribute Description
Required /
Optional
Default value
auth.server.name
The name of an authentication
server.
When registering a primary and a
secondary server, use a comma to
separate the names. The name of
the server, including the primary
name, secondary name, and the
comma (1 byte) must be 64 bytes
or less.
The names can use all ASCII code
characters except for the following:
\ / : , ; * ? " < > | $ % & ' ˜
In this manual, the value specified
here is called <server_ name>
hereafter.
Required None
auth.group.mapping Information about whether to work
together with an authorization
server:
• true: Works together
• false: Does not work together
Optional False
auth.ldap.<server_na
me>.protocol
LDAP protocol to use.
• ldaps: Uses LDAP over SSL/TLS.
• starttls: Uses StartTLS.
When you specify "true" to
auth.ldap.<server_name>.dns_look
up, specify ldaps.
Rquired None
auth.ldap.<server_na
me>.host
A host name, an IPv4 address or an
IPv6 address of the LDAP server. An
IPv6 address must be enclosed in
square brackets. To use StartTLS as
a protocol, specify a host name.
If this value is specified,
auth.ldap.<server_name>.dns_look
up will be ignored
Optional
1
None
auth.ldap.<server_na
me>.port
A port number of the LDAP server.
Must be between 1 and 65,535.
2
Optional 389
auth.ldap.<server_na
me>.timeout
The number of seconds before the
connection to the LDAP server
times out. It must be between 1
and 30.
2
Required 10
auth.ldap.<server_na
me>.attr
Attribute name to identify a user
(such as a user ID).
• Hierarchical model: An attribute
name where the value that can
identify a user is stored
Required None
188 User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English