Logging in to Device Manager - Storage Navigator
You can log in to Device Manager - Storage Navigator in different ways.
If you are an administrator, you can log in to Device Manager - Storage
Navigator with a one-time only initial login.
If you are a super-user, you can log in first to Device Manager - Storage
Navigator to create other user accounts.
If you are a Device Manager - Storage Navigator and storage system user or
administrator, you can log in normally.
Initial superuser login
When logging on to Device Manager - Storage Navigator for the first time,
you must log on as a superuser to set up additional user accounts.
The superuser account has a built-in ID, which includes all permissions, and a
default password.
Follow these instructions to log in as a superuser.
Procedure
1. Call your local service representative to obtain the superuser ID and
default password.
2. In your web browser, specify the URL for your SVP:
https://IP-address-or-host-name-of-SVP/sanproject/
To change the port number of the protocol from the initial value (443),
specify the following URL:
https://IP-address-or-host-name-of-SVP:port-number-of-the-
protocol/
3. Log in with the superuser ID and password.
4. To prevent unauthorized use of the superuser account, change the
password immediately after you log in. Click Settings > User
Management > Change Password to change your password.
After you log in, the Device Manager - Storage Navigator main window
opens. You can navigate using the menu, tree, or General Tasks. Precise
instructions for performing an operation can be found in the software
user guides. Also, see Appendixes D through G, which describe the
screens in the GUI.
Normal login
By logging in, you can manage users and licenses, create a login message, or
edit advanced system settings.
Preparing your management software 47
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General