Procedure
1. In your web browser, specify the following URL:
https://IP-address-or-host-name-of-SVP
If you changed the port number of the protocol HTTP from the initial
value (443), specify the following URL:
https://IP-address-or-host-name-of-SVP:port-number-of-the-
protocol-HTTPS/
If the loading window displays in Device Manager - Storage Navigator,
wait until the service status changes to Ready (Normal). At that time,
the login window displays automatically. The following is an example of
the loading window.
2. The following actions might be required to open the login dialog box,
depending on your environment:
• If a message indicates that the enhanced security configuration is
enabled on the management client, select In the future, do not
show this message and click OK.
• If the SVP is set to support SSL-encrypted communication and security
messages appear, make sure the certificate is correct and follow the
instructions in the dialog box.
• If a message indicates that certain web sites are blocked, follow
instructions in
Adding your SVP to the trusted sites zone for Windows
Server computers on page 50.
• If multiple storage systems are connected, a window which allows
selection of the storage system is displayed. Select the storage system
you want to connect.
3. When the Storage Device List window opens, select the storage system.
The Device Manager - Storage Navigator login window appears.
4. Type the user ID and password.
5. Click Login.
6. If the Security Information dialog box appears, click Yes.
48 Preparing your management software
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General