Open a CSV file in the folder extracted-folder\csv.
Viewing configuration reports in the Reports window
You can view only HTML format reports in the Reports window.
Procedure
1. Expand the Storage Systems tree, and then click Reports.
2. Click the name of the report to display.
The report is displayed in the Reports window.
3. In the Reports window, click the name of the report in the list at the
left, and then view the report at the right.
Creating configuration reports
You can create up to 20 configuration reports for each storage system. If you
already created 20 reports, delete unnecessary reports first, and then create
a new report.
Note: If you use the configuration setting (raidcom) command of CCI to
create parity groups and LDEVs, click File > Refresh All to update the
configuration information before creating a configuration report.
Before you begin
You must have Storage View permission to perform this task.
Procedure
1. Open the Create Configuration Report window. From General Tasks,
click Create Configuration Report.
2. Specify a task name and click Apply. This task name is used as the
report name in the Reports window. This process takes approximately
10 minutes to complete.
3. Click Refresh to update the Reports window. The created report
appears in the list.
Deleting configuration reports
You can delete a configuration report when you no longer need it, or to make
room in the Reports window when the number of reports is near the limit.
Before you begin
Users that create the report or users with the Storage Administrator (Initial
Configuration) role can delete a configuration report.
Managing storage system reports 277
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General