Hitachi VSP G400 System Administration Guide

Item Content
• Blank if "Package Type" is iSCSI or NAS module
Connection One of the Fibre topology settings:
• Point to Point
• FC-AL
• Blank if "Package Type" is iSCSI or NAS module
Channel Speed Channel Speed of this port
• 1 Gbps
• 2 Gbps
• 4 Gbps
• 8 Gbps
• 10 Gbps
• 16 Gbps
• 32 Gbps
• Auto
• Blank if "Package Type" is NAS module
WWN WWN of this port (hexadecimal number)
Blank if "Package Type" is iSCSI or NAS module
CHB Location CHB on which the port is installed. CHB-1A/1B/1C/1D or CHB-2A/2B/2C/2D if
"Package Type" is NAS module.
Package Type CHB type for CHB Location
• Fibre:
○ 8FC4 (CHB)
○ 16FC2 (CHB)
○ 32FC4R (CHB)
• iSCSI:
○ 10iSCSI2o (CHB)
○ 10iSCSI2c (CHB)
• NAS module:
○ NAS Module (CHB)
T10 PI Mode Indicates whether the T10 PI mode can be applied to the port.
• Enabled
• Disabled
• Blank if "Package Type" is not 16FC2 (CHB) or 32FC4R (CHB)
MicroVersion.csv
This CSV file contains information about software versions.
Table 45 MicroVersion.csv file (Title: <<Software Version>>)
Item
Content
DKCMAIN The version of the firmware for the RAID storage system (10 digits)
ROM BOOT ROM BOOT firmware version (6 digits)
RAM BOOT RAM BOOT firmware version (6 digits)
Config Config version (8 digits)
HDD HDD firmware version (4 digits)
HDD version in the format "(HDD-device-type - code):(version)".
338 Examples of storage configuration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English