Hitachi VSP G400 System Administration Guide

Operation name Condition
When you select the Apply same settings to the HBA WWN of all
ports check box, all the iSCSI targets where the specified HBA WWNs
are registered must be assigned to the Storage Administrator group
permitted to manage them.
Remove hosts The specified iSCSI target must be assigned to the Storage
Administrator group permitted to manage them.
Edit ports The specified port must be assigned to the Storage Administrator
group permitted to manage them.
Create alternative LUN
paths
The specified iSCSI target and all the LDEVs where the paths are set
to the iSCSI target must be assigned to the Storage Administrator
group permitted to manage them.
Copy LUN paths The specified iSCSI target and the LDEVs where the paths are set
must be assigned to the Storage Administrator group permitted to
manage them.
Edit command devices LDEVs where the specified paths are set must be assigned to the
Storage Administrator group permitted to manage them.
Edit UUIDs The specified LDEV must be assigned to the Storage Administrator
group permitted to manage them.
Delete UUIDs The specified LDEV must be assigned to the Storage Administrator
group permitted to manage them.
Release Host-Reserved LUNs LDEVs where the specified paths are set must be assigned to you.
Create iSCSI targets When you open the Create iSCSI targets window by specifying
iSCSI targets, the specified iSCSI targets must be assigned to the
Storage Administrator group permitted to manage them.
Edit iSCSI targets The specified iSCSI targets and ports must be assigned to the
Storage Administrator group permitted to manage them.
Delete iSCSI targets The specified iSCSI targets and all the LDEVs where the paths are
set to the iSCSI targets must be assigned to the Storage
Administrator group permitted to manage them.
Access requirements for Performance Monitor
The following table specifies the resource access requirements for
Performance Monitor operations.
Operation name
Condition
Add to ports The specified ports must be assigned to the Storage Administrator
group permitted to manage them.
Add new monitored WWNs
Edit WWNs
Access requirements for ShadowImage
The following table specifies the resource access requirements for
ShadowImage operations.
User administration 179
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English