Hitachi VSP G400 System Administration Guide

Operation name Condition
must be assigned to the Storage Administrator group permitted to
manage them.
Edit ports The specified port must be assigned to the Storage Administrator
group permitted to manage them.
Create alternative LUN
paths
The specified host groups and all the LDEVs where the paths are set
to the host groups must be assigned to the Storage Administrator
group permitted to manage them.
Copy LUN paths The specified host groups and the LDEVs where the paths are set
must be assigned to the Storage Administrator group permitted to
manage them.
Edit command devices LDEVs where the specified paths are set must be assigned to the
Storage Administrator group permitted to manage them.
Edit UUIDs The specified LDEV must be assigned to the Storage Administrator
group permitted to manage them.
Delete UUIDs The specified LDEV must be assigned to the Storage Administrator
group permitted to manage them.
Create host groups When you open the Create Host Groups window by specifying host
groups, the specified host groups must be assigned to the Storage
Administrator group permitted to manage them.
Delete host groups The specified host groups and all the LDEVs where the paths are set
to the host groups must be assigned to the Storage Administrator
group permitted to manage them.
Release Host-Reserved LUNs LDEVs where the specified paths are set must be assigned to you.
For iSCSI
Operation name
Condition
Add LUN paths When you specify host groups and open the Add LUN Paths
window, the specified iSCSI target must be assigned to the Storage
Administrator group permitted to manage them.
When you specify LDEVs and open the Add LUN paths window, the
specified LDEVs must be assigned to the Storage Administrator
group permitted to manage them.
Delete LUN paths When you specify an iSCSI target and open the Delete LUN Paths
window, the specified iSCSI target must be assigned to the Storage
Administrator group permitted to manage them.
When you specify LDEVs and open the Delete LUN Paths window,
the specified LDEVs must be assigned to the Storage Administrator
group permitted to manage them.
When selecting the Delete all defined LUN paths to above LDEVs
check box, the iSCSI target of all the alternate paths in the LDEV
displayed on the Selected LUNs table must be assigned to the
Storage Administrator group permitted to manage them.
Add hosts The specified iSCSI target must be assigned to the Storage
Administrator group permitted to manage them.
Edit hosts The specified iSCSI target must be assigned to the Storage
Administrator group permitted to manage them.
178 User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English