The following table describes the fields on this page:
Field/Item
Description
User Name Displays your user login name (cannot be changed).
Current Password Displays a series of dots representing the currently specified password
(the actual password cannot be displayed).
New Password The new password. The password cannot exceed 256 characters.
Confirm New
Password
The new password again. Must be exactly the same as what you
entered in the New Password field.
apply Saves the new password.
2. Enter your current password in the Current Password field.
If you have forgotten you password, contact a global administrator and
ask them to give you a new password. (Passwords are stored in an
encrypted form, and are not retrievable or visible by anyone. If a user
forgets their password, they must be given a new password, which they
can then change.)
3. Enter your new password in the New Password field.
4. Enter the new password again in the Confirm New Password field.
5. When finished, click apply to save the new password.
Changing another user's password
A global administrator can change the password of any user. If the user is
authenticated through a RADIUS server, however, the password must be
changed using the tools and utilities of the RADIUS server.
• For HNAS servers, use NAS Manager or the SMU CLI to change the user
password.
• For systems with NAS modules, use an external NAS Manager or the
maintenance utility to change the user password.
User administration 203
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General