Software bundle VSP G200 VSP G400, G600 VSP G800
Note:
1. The method for calculating the licensed capacity varies depending on the software contained
in each software bundle.
2. The used capacity for Remote Replication is the sum of TrueCopy and Universal Replicator.
Table 13 Software bundle licensed capacity for VSP F400, F600, F800
Software bundle VSP F400, F600, F800
Hitachi Storage Virtualization Operating System
(SVOS)
Unlimited
Hitachi Remote Replication Unlimited
Hitachi Encryption Key Unlimited
Hitachi Disaster Recovery Extended Unlimited
Calculating licensed capacity for a normal volume
A normal volume is a volume that is not blocked or protected. The volume
can be written to. The calculation of the normal volume capacity depends on
the volume emulation type. Use the formula in the following table to estimate
capacity for purchase. When you calculate the volume capacity, round the
value up to the second decimal place.
Table 14 Formulas for calculating capacity of a normal volume
Volume emulation type
Formula for calculating capacity of a normal volume
3390-x
1
870 KB × number-of-user-cylinders
OPEN-x
1
Same as the capacity specified when creating the volume
Notes:
1. x indicates a number or a letter. For example, OPEN-x refers to emulation types such as
OPEN-3 and OPEN-V.
An example is shown in the following table.
Table 15 Example of calculating license capacity
Item
Value
Volume emulation type 3390-3
Number of user cylinders 3,339
Number of volumes 2,048
Total capacity of all the volumes 870 KB × 3,339 × 2,048 = 5,949,296,640 KB
5,949,296,640 KB / 1,024 = 5,809,860 MB
262 Managing license keys
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General