Built-in group Role
Resource
group
• Support Personnel
Related tasks
• Checking if a role is available to a user group on page 163
Verifying the roles available to a user group
You can use Device Manager - Storage Navigator to verify the roles that are
available to use with any user group.
Before you begin
You must have the Security Administrator (View Only) role to perform this
task.
Procedure
1. In the Device Manager - Storage Navigator tree, click User
Administration.
2. On the User Groups tab, click the name (not the checkbox) of a user
group whose roles you want to check.
3. In the User Administration window, click the Roles tab.
The list of roles applied to the selected user group is displayed.
4. To return to the User Administration window, click User
Administration.
Checking if a role is available to a user group
You can use Device Manager - Storage Navigator to verify the roles that are
available to use with any user group.
You can assign users to one or more built-in user groups and custom user
groups. You cannot change roles or resource groups set to the built-in
groups, but you can create custom user groups according to the needs of
your storage environment.
Before you begin
You must have the Security Administrator (View Only) role to perform this
task.
Procedure
1. In the Device Manager - Storage Navigator Administration tree, click
User Administration.
2. On the User Groups tab, click the name (not the checkbox) of a user
group whose roles you want to check.
User administration 163
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General