System administration tasks at a glance
The following table summarizes key system administration tasks. The tool
used to perform these tasks depends on whether the storage system contains
NAS modules.
Table 2 System administration tasks at a glance
Task
Block-only storage
systems (no NAS
modules installed)
Block and file storage systems (NAS
modules installed)
Set IPv4 and IPv6 network
settings and set HTTP
blocking
Maintenance utility
See
IP addresses cannot be added, deleted,
or modified in the NAS Manager. To
change these addresses, use the
maintenance utility.
Set system clock (date and
time)
Maintenance utility
See Changing the date
and time on page 121
NAS Manager
See Changing the system date and time
of the NAS modules on page 126
Configure audit log settings Maintenance utility
See Audit log settings on
page 272
NAS Manager
See the File Services Administration
Guide (MK-92HNAS006) and the Server
and Cluster Administration Guide
(MK-92HNAS010)
Configure alert notifications Maintenance utility
See Alert notifications on
page 245
NAS Manager
See the Server and Cluster
Administration Guide (MK-92HNAS010)
Changing link aggregation N/A NAS Manager
See the Network Administration Guide
(MK-92HNAS008)
Change administrator
password
Maintenance utility
See Configuring the
storage system on
page 61
NAS Manager
See the Network Administration Guide
(MK-92HNAS008)
Edit the login message Maintenance utility
See Configuring the
storage system on
page 61
NAS Manager
See the Network Administration Guide
(MK-92HNAS008)
Select the SSL cipher suite Maintenance utility
See Configuring the
storage system on
page 61
NAS Manager
See the Network Administration Guide
(MK-92HNAS008)
Update certificate files Maintenance utility NAS Manager
See the Network Administration Guide
(MK-92HNAS008)
62 Configuring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General