• To manually create a path, click a WWN and a port to connect them
with a blue connector line. Click the connector again and then click
Delete Selected to delete the connection.
7. When you are satisfied with the paths, click Next to view options for
protecting volumes.
Managing storage systems
Access the storage system details page for an overview of registered storage
systems. If you need to configure the storage system, you will need to access
the service processor with Device Manager - Storage Navigator.
Storage system inventory
From the dashboard, click Storage Systems to access the Storage Systems
page for an overview of registered storage systems.
The Storage Systems page includes a summary section identical to the
summary on the dashboard. This includes monitoring tiles, capacity summary
and data protection summary.
You can search for a specific storage system by searching for its serial
number in the search box. You can also use various filters to find a specific
storage systems.
90 Configuring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General