Hitachi VSP G400 System Administration Guide

2. Start the openssl program:
openssl req –nodes –x509 -newkey rsa:2048 -sha1 -keyout /etc/
nginx/certificates/server.key -out /etc/nginx/certificates/
server.crt
The system returns the message Generating a 2048 bit RSA
private key.
3. Provide the information as prompted.
• Country Name (two-letter code)
• State or Province Name (two-letter code)
• Locality name (City)
• Organization Name (Company)
• Organizational Unit Name (Section or department)
• Common Name (Your name or the server host name)
• Email Address
4. When you receive the CRT file, send it to a certificate authority to obtain
an SSL certificate.
If you need help with this step, consult with your Hitachi Vantara
representative or authorized service provider.
5. Open a browser and enter the Virtual Appliance Manager URL in the
address bar.
For example, https://ip-address/vam
6. Click Advanced.
7. Click the Certificate Settings tab.
8. Import the certificate into the server.
a. Open the signed certificate (received from the certificate authority) in
a text editor.
b. Open the private key file (generated in step 2) in a text editor.
c. Copy the certificate file contents into the Certificate text box.
d. Copy the private key file contents into the Private Key text box.
e. Click Submit.
Using Device Manager - Storage Navigator
To configure the storage system using Hitachi Device Manager - Storage
Navigator, set up a client computer, and then log in to Hitachi Device
Manager - Storage Navigator.
Setting up a management client
Before running Device Manager - Storage Navigator on a management client,
certain web browser guidelines must be observed. Some guidelines apply to
all browsers, while other are specific to Internet Explorer and servers running
Windows.
Preparing your management software 41
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English