Field/Item Description
secured LDAP communications for Active Directory
authentication.
Search User Credentials
Distinguished Name The LDAP distinguished name for a user that has search
capabilities.
Password The password for the search user.
Servers
IP Address or DNS Name The address of one or more Active Directory servers for the
domain. Each server should hold identical content. The
maximum number of servers is 20.
find servers Queries DNS to show the list of available Active Directory
servers for the domain.
Add Add an Active Directory server after you have entered its
fully qualified domain name or IP address.
Move Up
Move Down
If there is more than one server, use these buttons to
prioritize the list.
Remove Remove a server from the list.
apply Submit the page and save the connection settings and server
list to the SMU database.
Groups
Groups with access to the
SMU
Shows groups with access to the SMU. Active Directory users
who belong to these groups can access the SMU.
Modify groups Click to go to the Active Directory Groups page, where you
can add groups.
Actions
remove all settings Removes all Active Directory server settings, including server
list, connection settings, search user credentials and groups.
After this action, Active Directory users can no longer log into
the SMU.
3. Enter the Distinguished Name.
This is the Distinguished Name of the Search User, an existing user that
has permission to access Active Directory. An Search User DN would
typically contain common name (cn) and possibly organization unit (ou)
attributes as well as the domain components. The domain components
should match those used in the Base Distinguished Name. An example
Search User DN is "cn= ldapguest, cn=users, dc=example, dc=com".
4. Enter the Password of the Search User (an existing user that may
access the directory).
5. There are two ways to add Active Directory servers.
232 Setting up security
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General