Hitachi VSP G400 System Administration Guide

Item Length in characters Characters that can be used
User name 1-20
• Alphanumeric (ASCII code)
characters
• The following symbols
1, 3
:
- . _
Password 6-63
• Alphanumeric (ASCII code)
characters
• The following symbols
1, 2
:
- , . : @ _
Note:
1. If the host on which CCI is installed is running on UNIX, a slash (/) can be specified.
2. If the host on which CCI is installed is running on Windows, a back slash (\) can be specified.
3. Do not specify a user name consisting of periods (.) (..) only, or specify a user name
beginning with a hyphen (-). If you specify such names, you cannot log in to NAS Manager.
Note: To use NAS Manager after installing NAS modules, users created with
DKCMAIN firmware 83-03-2x or earlier, must change the password. If you do
not change the password, you cannot log in to NAS Manager. Also, if a user
name contains more than 20 characters, the user cannot log in to NAS
Manager.
User name and password for Device Manager - Storage Navigator
Item
Length in
characters
Characters that can be used
User name 1-256
• Alphanumeric (ASCII code) characters
• The following symbols:
# $ % & ' * + - . / = ? @ ^ _ ` { | } ~
You cannot use the # symbol when you enter a user name in
a screen from the Tool Panel dialog box.
Password 6-256
• Alphanumeric (ASCII code) characters
• All symbols
You cannot use the quotation mark (") or backslash (\)
symbols when you enter a password in a screen from the
Tool Panel dialog box.
Note: If you cannot log in on a Tool Panel dialog box screen, check to see if
you have used a number sign (#) in the user name, or used a quotation
mark (") or a backslash (\) in the password.
User name and password for logging in to SVP
Item
Length in
characters
Characters that can be used
User name 1-128
• Alphanumeric (ASCII code) characters
154 User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English