4. The Security Administrator assigns the resource groups to the user
groups.
5. The Storage Administrator in the system division sets a port.
6. The Security Administrator assigns resources to the resource groups.
7. The Security Administrator assigns the Storage Administrators to the
appropriate user groups.
After the above procedures, the Storage Administrators in Divisions A and B
can manage the resource groups assigned to their own division.
Example of resource groups not sharing ports
If you assign ports to each resource group without sharing, performance can
be maintained on a different port even if the bulk of I/O is issued from one
side port.
The following shows a system configuration example of an in-house system
division providing the virtual private storage system for two divisions.
Divisions A and B each use individual assigned ports and parity groups. In
this example, they do not share a port.
170 User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models