Field/Item Description
Name The name of the new user account. This name will be requested when
logging in to the SMU. The rules for user names are:
• For Global administrators only, if the user will access the SMU
through the CLI, the user name:
â—‹ Must start with a letter or an underscore, and may consist of up
to 31 alphanumeric characters and the underscore (_) and the
hyphen (-).
â—‹ Cannot match certain special purpose names: root, manager,
postgres, nobody, or nfsnobody.
â—‹ Cannot match certain special purpose user ID numbers: for
example, those with uid less than 502.
• For all types of administrators, if the user will access the SMU only
through NAS Manager, the user name may consist of alphanumeric
characters and/or the underscore (_), the hyphen (-), the equal sign
(=), parentheses "(" or ")", brackets ( [ or ] ), the pound sign (#)
and the exclamation point (!).
• Supervisor is a reserved system user name. It is not available as a
new user name.
Note: If you are using RADIUS realms, and the global
administrator will access the SMU using both NAS Manager and
the CLI, use the underscore (_) to combine the user name and
the realm: for example, johnsmith_realm2. If the global
administrator will access the SMU using only NAS Manager, you
can use the at sign (@) to combine the user name and the
realm: for example, johnsmith@realm3.
User Type The user type is either local or RADIUS.
• Local users are those whose passwords are locally defined and
authenticated in the SMU.
User administration 199
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General