LdevInfo.csv
This CSV file contains information about logical devices (LDEVs). A record is
created for each LDEV.
For details of LDEVs, see the Provisioning Guide.
Table 40 Ldevinfo.csv file (Title: <<LDEV Status>>)
Item
Content
ECC Group Number of parity group where the LDEV belongs.
Output example: X-Y (decimals)
• If the number starts with "E" (for example, E1-1), the parity group contains
external volumes.
• If "LDEV Type" is Dynamic Provisioning or Thin Image, a hyphen is output.
LDEV# LDEV number
(00:00:00 to 00:3f:ff)
LDEV Name LDEV name
1
LDEV Emulation LDEV emulation type
LDEV Type LDEV type:
• Basic
• Dynamic Provisioning
• External
• Thin Image
• ALU
LDEV Attribute LDEV Attribute:
• CMDDEV (Command device)
• CMDDEV
1
(Remote command device)
• Journal (Journal volume)
• Pool (Pool volume)
• Quorum disk (used with global-active device)
• ALU
• SLU
• Deduplication system data volume
• Regular (Others)
Volume Size(Cyl) LDEV capacity (in cylinders)
Volume Size(MB) LDEV capacity (in MB)
Volume Size(Blocks) LDEV capacity (in blocks)
CVS Information about whether the LDEV is a custom-sized volume:
• On: Custom-sized volume
• Off: Others
Pool ID Pool number. This is blank except for the following cases:
• If "LDEV Type" is Dynamic Provisioning
• If LDEV Attribute is Pool
RAID Concatenation#0 Number of parity group to be concatenated to parity group (#0) identified by ECC
Group. Blank if the parity group is not concatenated to another parity group.
RAID Concatenation#1 Number of parity group to be concatenated to parity group (#1) identified by ECC
Group. Blank if the parity group is not concatenated to another parity group.
Examples of storage configuration reports 333
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
