Item Content
Output in the format XX/YY, where:
• XX: C#
• YY: R#
PDEV Location PDEV location name
Device Type Drive type
• SAS
• SSD
RPM Revolutions per minute
Blank displays as RPM when the drive is SSD.
Device Type-Code Device type code of this drive
Output example: DKR5D-J600SS
Device Size Drive size (inches)
• 2.5
• 3.5
• Blank for DBF (FMC or FMD)
Device Capacity Drive capacity (GB or TB)
Drive Version Drive firmware version (4-digit hexadecimal number)
DKB1 Name of the DKB1 controlling the PDEV
DKB2 Name of the DKB2 controlling the PDEV
Serial Number # Serial number of this drive (yymm xxxxxx), where:
• yy Year (last 2 digits)
• mm Month (2 digits)
• xxxxxx: Serial number of this drive
RAID Level RAID level of the parity group indicated by "ECC Group"
Blank if the "ECC Group" is Spare Drive or Free Drive
RAID Concatenation #0 Number of parity group to be concatenated to parity group (#0) identified by "ECC
Group"
1
RAID Concatenation #1 Number of parity group to be concatenated to parity group (#1) identified by "ECC
Group"
1
RAID Concatenation #2 Number of parity group to be concatenated to parity group (#2) identified by "ECC
Group"
1
Resource Group ID (ECC
Group)
Resource group ID of parity group (0 to 1023, decimal number)
Resource Group Name (ECC
Group)
Resource group name of parity group
Encryption Encryption status of the parity group to which the PDEV belongs
• Enabled: Encryption enabled
• Disabled: Encryption disabled
Accelerated Compression Accelerated compression setting.
• Enabled: accelerated compression is enabled.
• Disabled: accelerated compression is disabled.
If the parity group with PDEV does not support accelerated compression, or if the ECC
Group is Spare Drive, a blank space is displayed.
Notes:
Examples of storage configuration reports 343
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General