User name: service
Password: Chang3Me!
5. Change your password.
a. Click and select Change password.
b. Enter your new password.
6. From the Virtual Appliance Manager menu, click Network to configure
the network settings.
a. If your data center is using the IP address scheme 172.17.*.*, make
sure you provide another IP range that is not currently used in your
environment. This is the specified range used by Storage Advisor.
b. Set the host name for the virtual machine.
c. Set DHCP to On.
d. Enter the IP address of the Storage Advisor server.
e. Set Automatic DNS to On or Off.
If you set this to Off, enter the IP address of at least one DNS server.
f. Click Submit.
7. (Optional) From the Virtual Appliance Manager menu, click Time and add
Network Time Protocol (NTP) servers to the virtual machine.
Adding NTP servers verifies that the Storage Advisor servers are
synchronized with the storage system environment.
Preparing your management software 35
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
Need help?
General