Hitachi VSP G400 System Administration Guide

User name: service
Password: Chang3Me!
6. Enter the command ip-change.
The Change IP Address Utility opens.
7. Enter your settings at the prompts.
8. Reboot the VM to ensure that it has the IP address.
9. Open a browser and enter https://ip-address/vam in the address bar.
User name: service
Password: Chang3Me!
10. Change your password.
a. Click
and select Change password.
b. Enter your new password.
11. From the menu, click Network to configure the network settings.
a. If your data center is using the IP address scheme 172.17.*.*, make
sure you provide another IP range that is not currently used in your
environment. This is the specified range used by Storage Advisor.
b. Set the host name for the virtual machine.
c. Set DHCP to Off.
d. Enter the IP address of the Storage Advisor server.
e. Set Automatic DNS to On or Off.
If you set this to Off, enter the IP address of at least one DNS server.
f. Click Submit.
12. (Optional) From the Virtual Appliance Manager menu, click Time and add
Network Time Protocol (NTP) servers to the virtual machine.
Preparing your management software 37
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English