Holder C270 - Table of driving programmes 1)

Operation C250 ... C370
Translation of Original Operating Manual 156319-04 103
Table of driving programmes
1)
Programme switch (A)
Position Indication Function Use
Range 0 STOP Drive off e.g. stationary use
Range 1 Rabbit symbol Maximum speed e.g. for road driving
Range 2 Tortoise symbol Reduced speed e.g. for slow road dri-
ving, off-road
Range 3 PTO shaft symbol Driving speed adjustable with the fine adjust-
ment knob, controlled automatically if the im-
plement has a high power requirement
e.g. for mowing
Range 4
2)
Snow blower sym-
bol
Driving speed adjustable with the fine adjust-
ment knob, controlled automatically if the im-
plement has a high power requirement
e.g.specially tuned for
a snow blower
1)
The driving programmes can be adapted by Max Holder GmbH for special purposes, e.g a regulated
constant speed.
2)
With SDS Driving Comfort (option) the driving speed is controlled with the gas pedal.