Start-up C250 ... C370
82 Translation of Original Operating Manual 156319-04
Checking coolant
The radiator is located under the body frame.
Check the coolant level in the overflow reservoir (3,
in the rear on the left side) before attaching imple-
ments to the rear end.
WARNING
Danger of scalding by hot liquid
•
Open the cooling system only with
a cold engine
•
Never open a pressurized cooling
system with the engine hot
The cooling system is equipped with an overflow
reservoir (3 suction system).
1. Check the fill level at reservoir (3).
2. The fluid level must lie between the MIN and
MAX marks on the container.
ADVICE
Replenish missing coolant only via the
cap (2) on the radiator (1).
3. Open the cap (2) and replenish with coolant
having an appropriate specification.
(see Maintenance Data "Fluids and lubricants",
page 253).
To Next Page
Loading...
