Start-up C250 ... C370
Translation of Original Operating Manual 156319-04 89
1 Backrest
2 Backrest extension
3 Armrest, left
4 Armrest inclination adjustment
5 Inclination adjustment, folding down the
backrest
6 Safety belt
7 Horizontal suspension
8 Horizontal adjustment
9 Safety belt buckle
10 Weight display
11 Adjustment lever for body weight
12 Seat depth adjustment
13 Inclination adjustment of the seat bottom
14 Weight and height adjustment
Folding the seatback (1), drivers seat
1. Pull the lever (5) upwards. Seatback folds
down to the seat.
2. Pull lever (5) upwards and simultaneously
press the seatback into the vertical position.
Adjusting the backrest (1), drivers seat
1. Sit down on the seat.
2. Pull lever (5) upwards and use your back to
adjust the inclination of the backrest.
3. Release lever (5). Backrest is fixed in place.
Adjusting inclination of the seat bottom
(13), air-sprung* drivers seat
1. Pull the lever (13) upwards.
2. You can move the seat bottom into the de-
sired position by applying or removing weight
to the front or rear part of the seat,
Adjusting seat depth (12), air-
sprung*drivers seat
1. Pull the lever (12) upwards.
2. The desired position relative to the operating
console is achieved by simultaneously push-
ing the seat bottom forwards or backwards.
Adjusting height (14), air-sprung*drivers
seat
1. Sit down on the drivers seat.
2. You can change the seat level by completely
pulling or pressing lever (14).
To Next Page
Loading...
