Maintenance Instructions C250 ... C370
222 Translation of Original Operating Manual 156319-04
DANGER
Danger of poisoning, danger of ir-
ritation
•
Handle brake fluid and battery
acid carefully
•
Before lubrication work, exchang-
ing filters or working on the hy-
draulic system, carefully clean the
vicinity of the part in question
•
If hydraulic fluid under pressure
penetrates the skin (e.g. due to
leakage) immediately visit a physi-
cian
Safety instructions for maintenance
Please observe generally applicable safety and ac-
cident prevention regulations in addition to the
rules in this maintenance instruction!
1. The vehicle must be stationary and inopera-
tive during all maintenance work. Never un-
dertake maintenance work with the machine
running!
2. Capture fluids leaking during an inspection or
maintenance with appropriate containers and
dispose of them properly!
3. Prevent people from being present in the dan-
ger zone of the vehicle!
4. Switch off vehicle and implement drive units
before starting the engine.
5. Start engine only from driver's seat Do not
start the engine by short-circuiting the elec-
trical terminals at the starter, because the ve-
hicle can immediately begin to move.
6. Do not allow the engine to run in enclosed
spaces. Danger of poisoning!
7. Keep vehicle and attachments clean to avoid
risk of fire.
8. Never leave vehicle unattended while engine
is running.
9. When leaving the vehicle, secure against roll-
To Next Page
Loading...
